Contacts
Address
Malaysia, Selangor, Subang Jaya, 47620, 18 Jalan USJ 1/1B
Director
Ms. Joanne Chan
Phones of enterprise
management
+60
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
+60
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
TTS Valve Technologies, Sdn Bhd
This is the world of solenoid valves with or without explosion proof, the world of motorised and external pressure controlled valves. Special high pressure, high temperature, high corrosive & cryogenic solenoid valves.
In stock
2/2-way valves have one inlet port and one outlet port. They are used to shut-off or allow fluid to flow through the valve, available Normally Closed and Normally Open.
These valves have a pilot and bleed orifice which enable them to use line pressure for operation.
When the solenoid is...
Group: Pipeline valves
In stock
Constructed of high quality, corrosion-resistant material and available in the widest selection of sizes, strokes, and diameters, Parker Pneumatic Cylinders offer unbeatable reliability, performance, and options.The range of styles include standard and compact air cylinders, guide cylinders, ISO...
Group: Pneumatic actuators
In stock
PRV automatically reduce the pressure to a lower preset pressure and constant flow regardless of fluctuations of inlet pressure as long as the supply pressure does not drop below the preset level.The typical set up involves a spring and diaphragm that are connected to a pintle that regulates the...
Group: Regulating hydraulic valves
In stock
Direct mount ball valves are standard with ISO5211 mounting pads, mounting holes measured in PCD (F03/F04/F05/F07/F10/F12) and square shaft (9mm/11mm/14mm/17mm/22mm). They are directly mounted onto pneumatic and electric actuators, without bracket and adaptors.Flanged ball valves standard with...
Group: Pipeline valves
In stock
A Gate Valve also known as sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.Typical gate valves should never be used for regulating flow unless they are specifically designed for that purpose. On opening the gate valve, the flow is...
Group: Gate valves
In stock
2/2-way valves have one inlet port and one outlet port. They are used to shut-off or allow fluid to flow through the valve, available Normally Closed and Normally Open.
When the solenoid is energized in a direct acting valve, the plunger directly opens the orifice of a Normally Closed valve, or...
Group: Pipeline valves
In stock
Parker pneumatic valves cover the broadest range of industrial market applications. They offer control and performance, incorporating air valve technology such as wear compensated spool design, modular valves, manual and mechanical air valves, field bus compatible air valves. Parker Hannifin offers...
Group: Pipeline valves
In stock
AUTOMA pneumatic quarter turn actuator is available in double acting and spring return configurations. The design of Scotch Yoke is intended for use with quarter-turn valves need to be controlled, requiring high torque and where a compact actuator design is needed. The Scotch Yoke principle is...
Group: Pneumodrives